Realtek Ethernet Controller Driver Dell

I am experiencing the same. Wireless fine. Ethernet appears down with no internet access, although properties indicate activity. Dell had no updated drivers for Win 10, so downloaded Realtek drivers from their site. Rebooted, reset router, blah, blah, blah.still not resolved. Dragon Gigabit Ethernet Controller LG System Interface(TV) Realtek Gaming GBE Family Controller Realtek Gaming GbE Family Controller Realtek PCI GBE Family Controller Realtek PCIe 2.5GbE Family Controller Realtek PCIe FE Family Controller Realtek PCIe GBE Family Controller Realtek PCIe GbE Family Controller Realtek RTL8101 Family PCI-E Fast.

I just got a Dell Inspiron 5565. It has a realtek r8169 gigabit network card which connects at 100 Mbps (instead of 1000 Mbps) with my install of Ubuntu 18.04 LTS. I tried to download the driver from realtek, and followed the directions. Here is the link to the driver, the readme file has the directions :). Realtek r8169 Driver

I installed make using sudo apt-get install makeWHen I try to sudo make clean modules I get the error:

If I move ahead to sudo make installI get the error:

So my questions are, why doesn't the built in kernel module support gigabit connections?Also,What should I do?A debian forum suggests that you have to load the realtek firmware to get Gigabit performance. Thanks in advance :).

Update: 6/12/2018At this point I installed the missing dependencies and tried the realtek r8169 drivers and the r8168dkms drivers with the same result. I tried to Known Good (KG) cat 6 cables that connect at gigabit on another Ubuntu 16.04 system. I tested them in my Netgear Nighthawk R7000 Router which is running firmware version V1.0.9.26_10.2.31. I even connected directly to the cable modem. I tried forcing Gigabit with sudo ethtool -s enp1s0 speed 1000 duplex full I went into the router settings too and made my machine the highest priority. The result was the same. 100 MBits.

Realtek Ethernet Controller Driver Dell

3 Answers

I had the same issue with 18.04 built-in r8169 driver not being able to negotiate gigabit speed. Then I found this in kernel log (dmesg grep r8169):

It seems to me the driver struggled at finding the address/port number (?) of the NIC. Fortunately re-trying initialization again made the issue go away. Maybe it's a timing issue?

What I did was to add several lines into rc.local to force reloading the r8169 kernel module:

Then the kernel log changes to this:

Realtek Ethernet Controller Driver Windows 8 Dell

From this point on, it works on gigabit speed without any more issues.
Hope this helps.


Backtrack 5 r3 64 bit download torrent. It looks like you currently have a couple errors that are preventing you from compiling and installing the driver (but there may be others, I can't tell from the given information).

  1. ./scripts/ line 26: gcc: command not found. It appears as though you do not have gcc installed. Run apt install gcc.

  2. 'Cannot use CONFIG_STACK_VALIDATION=y, please install libelf-dev, libelf-devel or elfutils-libelf-devel' Looks like you needs to install these packages as well.

  3. CONFIG_X86_X32 enabled but no binutils support. You may not have binutils package installed, or it might need the binutils-dev package.


The driver that you're trying to install only is for kernels up to 4.7.

The Ubuntu supplied r8169 driver (has been) known to be flawed with ethernet disconnects for some time.

You've either got the wrong ethernet cable, or plugged into a non-gigabit network switch/hub/router.

Or you need to install r8168-dkms to solve your problem.


Not the answer you're looking for? Browse other questions tagged drivers18.04compilingethernetrealtek or ask your own question.

36 downloads·Added on: March 10, 2017·Manufacturer: REALTEK
This package provides the driver for the Realtek PCI-E Ethernet Controller Driver.

Fixes & Enhancements

- Added the support for Dell Inspiron 7467.

Applies to:

- Realtek PCI-E Ethernet Controller

Dell Update Package Instructions

1. Click Download File to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.

Realtek Ethernet Controller Driver Dell Laptop

About Wireless LAN Driver:

Windows OSes usually apply a generic driver that allows systems to recognize the wireless component. However, in order to use all available features of this hardware, you must install the appropriate drivers.
Enabling the wireless card allows systems to read chipset information and manufacturer name, as well as connect to a network without using an Ethernet cable.
Updating the driver version can resolve different compatibility issues, fix related errors spotted throughout the product’s usage, add support for new operating systems, improve transfer speed, as well as bring various other changes.
As for applying this release, the installation steps should not pose to much of a challenge since each producer intends to make the procedure as easy as possible: just download the package, run the setup, and follow the on-screen instructions.
Bear in mind that we do not recommend you install this release on OSes other than the specified ones even though other platforms might also be suitable. Also, when the update has finished, do perform a restart to ensure that all changes take effect properly.
Therefore, if you wish to apply this package, click the download button, and setup the wireless card on your system. Moreover, if you want to stay “updated one minute ago,” check with our website as often as possible.

Windows 7
Windows 7 64 bit
Windows 8
Windows 8 64 bit
Windows 8.1
Windows 8.1 64 bit
Windows 10
Windows 10 64 bit
file size:
22.1 MB

Realtek Ethernet Controller Driver For Dell Inspiron

Network Card

It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver.
Problems can arise when your hardware device is too old or not supported any longer.

Comments are closed.